Klimaire KTHN012E3C211BC Overview
The new PTAC air conditioner from Klimaire is durable, quiet, reliable, and easy to maintain. Standard features provide maximum flexibility to meet any application requirement as well as reducing installation and labor costs. When the climate is hot, Klimaire air conditioners will provide the relief you need. Available at AppliancesConnection
Features:
Last generation control panel
Control panel has LED indicators and push buttons for MODE, FAN, POWER and set points UP and DOWN. The control can display the temperature either in ºF or ºC.
Compressor restart delay
Prevents short-cycling the compressor and to extend the overall life of the air conditioner. There is a 3 minute delay to equalize refrigerant pressures for optimizing cycling.
Evaporator freeze protection
When the evaporator temperature is too low this vital function prevents the evaporator to freeze by turning off the compressor to prevent liquid slugging the compressor, but keeping the indoor fan running continuously.
Memory function
Upon a power failure, restores all of the functions to their previous setting, eliminating so all discomfort during unattended sleep operation.
Comfort quick warm-up (heat pump models only)
Once the room temperature falls 8º F below the set temperature, in the heat pump mode the compressor shuts off and the auxiliary electric strip heater is turned on for one cycle until heating set parameters are satisfied.
Customized set point temperature limits
Provide a restricted range of temperature control for commercial applications reducing power consumption of the building.
Easy to use controls
KTHM control panel is designed for simple operation. Controls are easy to read, understand, and activate by the help of LED lights showing current status. This is ideal for commercial applications eliminating phone calls to floor managers.
Additional Features
- Power Cord – Factory supplied power cord with 3-prong grounding plug and current detection device with reset
- Fresh air intake – Adjustable fresh air intake flap provides the outside air requirements for commercial or residential applications with built-in polypropylene dust collector filter.
- Easy to clean filter – Pull out long life polypropylene dust collector filter offers effective air filtration and is easy to clean and to maintain without opening the intake front panel.
- Cools up to 400 sq. ft.
- Fit into standard 42″x16″ frame slide sleeve to replace major brands.
- Exceptional quiet operation
- Full up slide washable filter for easy maintenance.
- Push button controls – Farenheit (F) or Celsius (C) switchable setting.
- Slim front depth
- Factory supplied power cord w/ reset breaker 20A for 9k / 12k, & 25A for 15k
- Ventilation, fresh air intake switch
- Dual fan motors assure whisper quiet performance
- Easy maintenance with pull up washable filters
- Drain kit included in the base unit
- Power 208-230 V / 1 ph / 60 Hz
- 24V Wall thermostat control ready
- Built-in remote control receiver